10
OPERATION PANEL
The keys inside are explained on the next page.
JOB STATUS
SYSTEM
SETTINGS
HOME
PROOF COPY
LOGOUT
Touch panel
Messages and keys appear in the LCD display.
Operations are performed by directly touching
the displayed keys with your fingers.
When a key is touched, a beep sounds and
the selected item is highlighted. This lets you
check an operation as you perform it.
Main power indicator
Status indicators
Green and red indicators light and blink to indicate the status of
the machine. The green indicator is on the left side and the red
indicator is on the right side. When the green indicator lights or
blinks, the machine is operating normally. The red indicator will
light up when toner is low or it is time for maintenance. When the
machine stops operating due to a paper misfeed or out of toner,
the red indicator will blink.
Use this key to activate power
save mode. The [POWER
SAVE] key blinks when the
machine is in power save
mode. This key is also used to
deactivate power save mode.
This indicator lights when
the main power is
switched on.
When auto power shutoff
is in effect and data can
be transmitted and
received, the indicator
lights orange.
[POWER SAVE] key ( )[POWER] key ( )
Use this key to turn the
machine power on and off.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
