Sharp SF-2052 - Page 116

114
KEY OPERATOR PROGRAMS
Key operator programs
To display all registered account numbers
1. Press key 4.
●
The following message will appear.
P14: ACCOUNT NUMBER CONTROL.
ACCOUNT NUMBER DISPLAY (PAGE 1)
TO SEE PAGE 2: PRESS THE KEY.
2. If you want to see the next display, press the SCROLL
DISPLAY key. Press the PROGRAM key to exit the
program.
P16 Account Limit Setting
Program P16 is used to set the maximum number of copies which can
be made against a registered account number.
When P16 is entered, the following message will appear.
P16: ACCOUNT LIMIT SETTING.
1.SET LIMIT 2.CANCEL LIMIT
To set a limit
1. Press key 1.
●
The following message will appear.
P16: ACCOUNT LIMIT SETTING.
INPUT ACCOUNT NUMBER TO BE LIMITED
AND PRESS THE START KEY. –––––
2. Enter the account number to be limited.
●
To set a limit for all accounts, skip the account number entry
and proceed to the next step.
3. Press the START key.
●
The following message will appear.
P16: ACCOUNT LIMIT SETTING.
INPUT MAXIMUM NUMBER OF COPIES FOR
AN ACCOUNT AND PRESS THE START KEY.
ACCOUNT NUMBER MAXIMUM
000,000
4. Enter the upper limit (max. 999,999) for the account.
5. Press the START key.
6. To limit other accounts, repeat steps 2 to 5. Press the
PROGRAM key to exit the program.