Sharp SF-2052 - Misfeed Removal

80
OPTIONAL EQUIPMENT
20-BIN SORTER (SF-S16)
1
Open the top cover and remove the misfed paper.
2
Close the top cover.
●
Confirm that the misfeed display is cleared.
3
If the message indicating a misfeed is still displayed, or
the misfed paper cannot be seen from the top, slide the
sorter carefully away from the copier.
4
Open the side cover and remove any misfed paper.
5
Close the side cover and push the sorter back against
the copier.
●
Confirm that the misfeed display is cleared.
●
If the message indicating a misfeed is still displayed, check the
inside of the copier and remove any remaining misfed paper.
Misfeed removal
The copier will stop when a misfeed occurs.
The message “A MISFEED HAS OCCURRED. CLEAR INDICATED
AREA. PRESS THE KEY FOR RECOVERY INSTRUCTIONS.”
will appear with a display of paper misfeed locations. Press the
INFORMATION and SCROLL DISPLAY keys for more detailed
information as necessary.
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS THE KEY FOR RECOVERY
INSTRUCTIONS.
20-bin sorter (SF-S16)