Sharp SF-2052 - Using a Staple Sorter

83
OPTIONAL EQUIPMENT
20-BIN STAPLE SORTER (SF-S53N)/20-BIN STAPLE SORTER (SF-S55N)
Using a staple sorter
Press the SORTER key to select the desired mode.
To cancel the mode, press the SORTER key until the SORT,
STAPLE SORT and GROUP indicators all go out.
NON-SORT
When none of the three sorter modes, SORT, STAPLE SORT or
GROUP is selected, the copier is in the NON-SORT mode. In this
mode, all copies will be deposited in the top bin of the sorter.
Be sure to use the NON-SORT mode when copying onto special
papers such as transparency film or label stock.
SORT
Press the SORTER key to select the SORT mode.
SORT is used for automatic copy collating. Copies of each original
will be sequentially deposited in the sort bins.
STAPLE SORT
Press the SORTER key to select the STAPLE SORT mode.
In this mode, copies will be automatically sorted and finished sets of
copies will be automatically stapled when used in conjunction with
the RADF.
GROUP
Press the SORTER key to select the GROUP mode.
In the GROUP mode, all copies of the same original will be
deposited in the same bin.
GROUP
SORT
SORT
STAPLE
SORT
GROUP
PRE-COUNT
ORIGINALS
EVEN NUMBER
ODD NUMBER
1 1
2
2
2
2
11
(ORIGINALS)
SORT
STAPLE
SORT
GROUP
PRE-COUNT
ORIGINALS
EVEN NUMBER
ODD NUMBER
1 1
2
2
2
2
11
(ORIGINALS)
SORT
STAPLE
SORT
GROUP
PRE-COUNT
ORIGINALS
EVEN NUMBER
ODD NUMBER
1 1
2
2
2
2
11
(ORIGINALS)
SORT
STAPLE
SORT
GROUP
PRE-COUNT
ORIGINALS
EVEN NUMBER
ODD NUMBER
1 1
2
2
2
2
11
(ORIGINALS)
20-bin staple sorter (SF-S53N) 20-bin staple sorter (SF-S55N)