Sharp SF-2052 - Page 29

27
INSERTS
MAKING COPIES
Inserts
To place insert sheets with printing in the
1-sided copy mode
1
Make note of the numerical positions of the original
pages which are to be copied onto insert sheets. In the
example to the left, these are positions 3 and 6.
2
Place the originals face up in the document feeder tray.
3
Press the COVERS/INSERTS key.
●
If the 1/ 1 mode was previously selected, the following
message will appear. If the 2
//
//
/1 mode has been selected with
the ORIGINAL TO COPY key, the message in step 4 will
appear.
USE 10-KEY PAD TO SELECT ORIGINAL TO
COPY MODE. IT IS NOT POSSIBLE TO
CHANGE MODE AFTER THIS FUNCTION IS SET
1
//
//
/ 1: 1
1
//
//
/ 2
EVEN NUMBER ORIGINALS : 2
ODD NUMBER ORIGINALS : 3
2
//
//
/ 2: 4
2
//
//
/ 1: 5
4
Press key 1 or key 5 on the 10-key pad to select a 1-
sided copy mode.
●
The selected item will be highlighted and then the following
message will appear.
1
2
3
4
5
6
1
2
3
4
5
6
4
5
6
1
2
3
INSERTS WITH
PRINTING
7
8
7
8
7
8
SORTER
COVERS/
INSERTS
MARGIN
SHIFT
ER TRANSPARENCY
INSERTS
ORIGIN
123
456
7
8
9
C
0/
AUDIT CLEAR
COVERS AND INSERTS
USE 10-KEY PAD TO SELECT COVERS /
INSERTS MODE.
COVERS
: PRESS 1
INSERTS
: PRESS 2
COVERS+INSERTS
: PRESS 3