Sharp UX-108 - Page 29

<P=002>
Handset
1
Lift the handset.
UP
2
Press the UP or DOWN key.
or
Display:
RECEIVER: HIGH
RECEIVER: MIDDLE
DOWN
UP
or
START
DOWN
RECEIVER: LOW
3
When the display shows the desired volume level, replace the handset.
Ringer
1
Press the UP or DOWN key. (Make sure the SPEAKER key has not been
pressed and the handset is not lifted.)
•
••
• The ringer will ring once at the selected level, then the date and time will
reappear in the display.
Display:
RINGER: HIGH
RINGER: MIDDLE
RINGER: LOW
RINGER OFF: OK?
3
If you selected RINGER OFF: OK?, press the START key.
1. Installation
Volume Adjustment
21