Sharp ViewCam-Slim VL-ME10S - Dubbing Images from a Card to a Tape

Digital Still Camera
Features
Digital Still Camera Features
Playback
83
4 Slide Show Playback begins.
• The recorded images will be displayed
in full-screen one after another in order
of recording.
After playing back all the images on the
card once, Slide Show Playback automati-
cally stops.
5 Press the MENU/DISPLAY button to
turn off the menu screen.
To stop Slide Show Playback
During slide show playback, press CANCEL,
then press the MENU/DISPLAY button to turn
off the menu screen.
Notes:
• The display interval may vary depending upon
the image size.
• Slide Show Playback automatically stops if you
press the MENU/DISPLAY button.
• Slide Show Playback cannot be used with
Picture Effect Playback.
Dubbing Images from a Card
to a Tape
Available mode: CARD-VCR
Use the procedure below to select still images
recorded on a card and dub them to a tape.
1 Insert the recorded card and a Mini DV
cassette in the camcorder.
2 Set the camcorder to TAPE-VCR mode,
then cue to the location on the tape to
be dubbed.
3 Set the camcorder to CARD-VCR mode.
4 If the image you want to dub does not
appear, press q or w to scroll through
the thumbnail images.
5 Press q or w to select the desired
image, then press PB.
• The selected image is displayed in full-
screen.
NORMAL
PLAYBACKPLAYBACK
22
100 0012-100 0012-
PAGE
121110
987
PB
qw
NORMAL
22
PAGE
100 0009-100 000
9
-
PLAYBACKPLAYBACK
121110
987
PB
qw
SL I DE S
S
HOWSL IDE SHOW
CARD
CANCEL
CANCEL
CANCEL
PB