Sharp ViewCam-Slim VL-ME10S - Using the Menu Screens

Summary of
Operations
32
Using the Menu Screens
The menu screens can be used to adjust the
various settings of the camcorder.
1 Open the LCD monitor and adjust the
angle (see page 22).
2 Set the Media Selection
switch to TAPE or
CARD.
3 Hold down the Lock
button and set the
POWER switch to
CAMERA or VCR.
4 Press the MENU/DISPLAY button until
the menu screen appears.
5 Press f or d (1) to select the desired
menu screen, then press SET (2).
M AN. FOCUS
EXPOSURE
SHUT. SPEED
PIC.EFFECT
SCENE MENU
QK.
DIS
RETURN
RETURN
MANUAL SE T
SET
as
PHOTO SNAP SNAP
DGTL
REC
ZOOM
EFF.
MODE
SNAP
SPEED
16 9:
CAMERA SET
TAPE
RETURN
SET
as
Lock button
SET
as
1 1 2
SET
as
1 1 2
SET
as
1 1 2
6 Press f or d (1) to select the desired
menu item, then press SET (2).
• The available settings for the selected
menu item are displayed.
7 Press f or d (1) to select the desired
menu setting, then press SET (2).
• The selected menu setting is set.
• To adjust another menu item, select
RETURN to returns to the status in step
5 or 6, then repeat the procedure from
the point.
To turn off the menu screen
Press the MENU/DISPLAY button.
Notes:
• Certain menu items are common among
Camcorder modes. If the DISPLAY menu item,
for example, is set to “DATE+TIME” in TAPE-
CAMERA mode, it will be automatically set to
“DATE+TIME” in other modes.
• The menu items are displayed in yellow when
the corresponding functions are selected. The
menu items are displayed in gray when the
corresponding functions cannot be selected.
• The menu screen automatically turns off if no
settings are made within five minutes.
• The example screens in this operation manual
are for explanation purposes, and may differ
slightly from the actual screen displays.
Example
Example
Example
OFF
40
200
PHOTO SNAP
REC
EFF.
DGTL ZOOM
SPEED
16 9:
CAMERA SET
MODE
SNAP
TAPE
RETURN
SET
as
200
PHOTO SNAP
REC
EFF.
DGTL ZOOM
SPEED
16 9:
CAMERA SET
MODE
SNAP
TAPE
RETURN
SET
as