Sharp ViewCam-Slim VL-ME10S - Windbreak; Dialogue Recording

64
Advanced
Features
Notes:
• When the camcorder is in EASY mode, the Zoom
Microphone mode is fixed to “AUTO” and cannot
be selected on the menu screen.
• You can also use headphones while recording.
The volume is adjusting with the remote control.
Windbreak
Available modes: TAPE-CAMERA, DUAL-
CAMERA
The windbreak function allows you to reduce
annoying noise from strong winds when
recording.
1 In TAPE-CAMERA or DUAL-CAMERA
mode, display the menu screen.
2 Select U, then press SET. Select
“WIND” (1), then press SET (2).
3 Press f or d to select “ON”, then press
SET.
4 Press the MENU/DISPLAY button to
turn off the menu screen.
To cancel Windbreak
Select “OFF” in step 3 above.
Note:
• Keep the windbreak function off during normal
recording. If it is left on, the recorded audio may
sound somewhat muffled when played back.
OFF
ON
AUD I O MODE
W IND
ZOOM MI C
AUD I O SE T
D I ALOG REC
RETURN
SET
as
ON
WIND
SET
as
1 1 2
Dialogue Recording
Available modes: TAPE-CAMERA, DUAL-
CAMERA
When you want to record from a distance at a
lecture, workshop, or other such occasion, the
speaker’s voice may blend in with ambient
sounds. You can use the Dialogue Recording
function to pick up the speaker’s voice more
distinctly.
1 In TAPE-CAMERA or DUAL-CAMERA
mode, display the menu screen.
2 Select E, then press SET. Select
“DIALOG REC”, and then press SET.
3 Press a or s to select “ON”, then press
SET.
4 Press the MENU/DISPLAY button to
turn off the menu screen.
To cancel Dialogue Recording
Select “OFF” and then press SET in step 3
above.
OFF
ON
AUD I O MODE
W IND
ZOOM MI C
AUD I O SE T
D I ALOG REC
RETURN
SET
as
ON
DIALOG REC