i
Quick Operation Guide
Quick Operation Guide
Please consult this operation manual further for
details on these and other functions of your
camcorder.
Charging the Battery Pack
1 Connect the supplied power cord to the
AC power socket on the AC adapter/
battery charger, and insert the AC plug
into a power outlet.
2 Align the d mark on the battery pack
with the f mark on the charger (1) and
guide the battery into the groove.
Pressing the battery (2), slide it in the
direction of the arrow (3) until it locks
into place.
• The CHARGE indicator lights up. The
indicator goes off when the battery is
fully charged.
Attaching the Battery Pack
1 Make sure that the POWER switch is set
to OFF.
2 Pull out the viewfinder completely, then
lift it up.
3 Align the mark on the side of the
battery pack with the a mark on the
camcorder (1). Press the battery pack
and slide it down completely until it locks
into place (2).
CHARGE indicator
1
2
3
Inserting a Mini DV Cassette
1 Supply power to the camcorder.
2 Hold the camcorder as shown, slide the
cassette compartment door release and
open the cassette compartment door
completely.
3 Insert the cassette fully with the window
facing upwards and the erasure protect
tab facing outwards.
4 Press the mark gently until the
cassette holder clicks into place.
5 Close the compartment door by pressing
the centre until it clicks into place.
SAVE
REC
SAVE
REC
To Next Page
Loading...
