EasyManua.ls Logo

Sharp ViewCam-Slim VL-ME10S - Using the Lens Cap

Sharp ViewCam-Slim VL-ME10S
119 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparation
Preparation
19
Notes:
Providing the date and time have been internally
set, they will always be recorded on the tape or
card, and you can choose to display them or not
(see page 49).
The menu screen automatically turns off if no
settings are made within 5 minutes.
You can also adjust the clock in the CLOCK SET
menu in DUAL-CAMERA or CARD-CAMERA
mode.
Using the Lens Cap
Attach the strap of the lens cap to the hand
strap as shown below.
When attaching or
removing the lens cap,
press both tabs on the
top and bottom of the
cap.
When recording,
hang the hook of the
lens cap on the hand
strap so that the cap
will not get in the way.
Note:
Always replace the
lens cap on the lens
when the camcorder is not in use.
12H
21H24H
7 Press f or d to select 6 (month), then
press SET.
8 Press f or d to select 2002 (year),
then press SET.
9 Press f or d to select 10 (hour), then
press SET.
10 Press f or d to select 30 (minute),
then press SET.
The internal clock now starts operating.
11 Press the MENU/DISPLAY button to
turn off the menu screen.
Changing to the 12-hour Time
Mode
1 After performing step 10 above, press f
or d (1) to select 12H/24H, and then
press SET (2).
2 Press f or d to select 12H, then
press SET.
3 Press the MENU/DISPLAY button to
turn off the menu screen.
Tabs
2
SETT ING
2. 6 001.
000
:
SET
as
1 1 2
Hook
SETT ING
2.
0
6 2002.
00
:
SETT ING
2.
10 00
:
6 2002.
10 3
:
SETT ING
2.
0
6 2002.
24H
12H
DISPLAY
AREA
SETT ING
RETURN
12H 24H
CLOCK SET
SUMR T I ME
SET
as

Table of Contents

Related product manuals