Useful Features
Camera Recording
Useful
Features
35
Digital Image Stabilization
(DIS)
Available modes: TAPE-CAMERA, DUAL-
CAMERA, CARD-CAMERA
The digital image stabilization (DIS) function is
factory preset to on to stabilize the image by
electronically compensating for relatively minor
image shaking that is often annoying in close-
up shots.
Note:
• The DIS function cannot compensate for
excessive image shaking.
Turning Off the DIS Function
When image shaking does not occur (e.g.
when using the camcorder on a tripod), turn off
the DIS function. The picture will appear more
natural when the DIS function is off.
1 Set the camcorder to TAPE-CAMERA,
DUAL-CAMERA or CARD-CAMERA
mode (see page 29).
2 Press the MENU/DISPLAY button until
the menu screen appears.
3 Select T, then press SET. Select “DIS”
(1), then press SET (2).
DIS indicator
AUTO
60
min
GAMMA
FADE
SRCH
SRCH
OFF
DIS
ON
OFF
M
AN. FOCUS
EXPOSURE
SHUT. SPEED
PIC. EFFECT
SCENE MENU
QK. RETURN
DIS
MANUAL SET
RETURN
SET
as
SET
as
1 1 2
4 Press f or d to select “OFF”, then
press SET.
5 Press the MENU/DISPLAY button to
turn off the menu screen.
• The z indicator is turned off.
To return to DIS mode
Select “ON” in step 4 above.
To Next Page
Loading...
