Sharp ViewCam-Slim VL-ME10S - Card Playback

iv
Lock button
NORMAL
CARD
10/90
AUTO
GAMMA
GAMMA
GAMMA
To turn the power off
Set the POWER switch to OFF without pressing
the Lock button.
Card Playback
1 Make sure that the recorded card is
inserted.
2 Open the LCD monitor and adjust the
angle.
3 Set the Media Selection
switch to CARD.
4 Hold down the Lock
button and set the
POWER switch to VCR.
5 If the image you want to play back does
not appear, press q or w to scroll
through the thumbnail images.
6 Press q or w to move the selection
frame to the desired image, and then
press PB to set.
• The selected image is displayed in full-
screen.
Power Zoom buttons
STILL button
Media Selection switch
POWER switch
Lock button
NORMAL
PLAYBAPLAYBA
CK
100 00 33100 00-
-
21
PAGE
CK
54
1
2
3
6
00
PB
qw
100-0003100-0003
3/12
100-0003
CARD
3/12
NORMALNORMAL
NORMAL
MULTIMULTI
qw
qw
PB
Card Recording
1 Make sure that a card is inserted.
2 Remove the lens cap. Pull out the
viewfinder completely or open the LCD
monitor.
3 Set the Media Selection
switch to CARD.
4 Hold down the Lock
button and set the
POWER switch to
CAMERA.
5 Press the Power Zoom buttons to frame
the subject as you desire.
6 Press the STILL button to record a still
image of the subject.