v
Quick Operation Guide
Dual Recording
The Dual Recording function makes it possible
to record motion images on a tape and still
images on a card.
1 Make sure that a Mini DV cassette and a
card are inserted.
2 Remove the lens cap. Pull out the
viewfinder completely or open the LCD
monitor.
3 Set the Media Selection
switch to DUAL.
4 Hold down the Lock
button and set the
POWER switch to
CAMERA.
5 Press the Power Zoom buttons to frame
the subject as you desire.
6 Press the REC START/STOP button to
begin recording motion images of the
subject on a tape.
• Press the REC START/STOP button
again to pause recording.
Press the STILL button to record a still
image of the subject on a card.
To turn the power off
Set the POWER switch to OFF without pressing
the Lock button.
Lock button
Media Selection switch
STILL button
REC START/STOP button
POWER switch
NORMAL
CARD
2/98
CARD
AUTO
60
min
Q
GAMMA
FADE
SRCH
NORMAL
REC
2/98
AUTO
60
min
GAMMA
FADE
SRCHSRCH
To Next Page
Loading...
