66
Advanced
Features
Editing with the DV Terminal
(IEEE1394)
Available mode: TAPE-VCR
This camcorder enables you to perform digital
video editing. Connect the camcorder to video
equipment with a DV terminal using the
supplied DV cable. The DV cable is able to
transfer all dubbing signals including video
and audio.
To DV terminal
DV cable (supplied)
Video equipment
with DV terminal
(e.g. DV camcorder)
To DV terminal
Playback
Recording
Cutting Unwanted Sequences
Perform “Cutting Unwanted Sequences” on
page 65, using the video equipment as the
recording source.
Note:
• Make sure that the video equipment to which
you are recording can input dubbing signals via
the DV terminal.
To Next Page
Loading...
