Sharp ViewCam-Slim VL-ME10S - Deleting Stored Images

Digital Still Camera
Features
80
Delete-protection indicator
4 Press SET to set the protection.
• The R indicator appears.
• If you want to protect another image,
repeat steps 3 and 4.
5 Press RETURN, then press the MENU/
DISPLAY button to turn off the menu
screen.
To cancel the protection setting
1 Select the image for which the protection
setting is to be canceled in step 3 above.
2 Press CANCEL to cancel the protection.
• The R indicator disappears.
3 Press RETURN, then press the MENU/
DISPLAY button to turn off the menu
screen.
Note:
• Formatting a card deletes all images on it,
including the ones with the delete-protection
setting.
Deleting Stored Images
Available mode: CARD-VCR
You can delete unwanted images to free up
memory of a card for new images.
Note:
• Deleted images cannot be restored. Check
whether or not you want the images before
performing the procedure below.
Deleting a Particular Image
1 In CARD-VCR mode, press the MENU/
DISPLAY button until the menu screen
appears.
2 Select O, then press SET. Select
“DELETE” (1), then press SET (2).
3 Press q or w to select the image to be
deleted.
NORMAL
22
PAGE
100 0010-100 0010-
PROT ECTPROTECT
1211
10
9
8
7
CANCEL RETURN
qw
NORMAL
22
PAGE
100 0010-100 0010-
PROT ECTPROTECT
1211
10
9
8
7
SET RETURN
qw
NORMAL
100 0009-100 0009-
DELETEDELETE
22
PAGE
1211
10
98
7
SET
RETURN
qw
SL IDE SHO W
EFFECTPIC.
DELETE
PROTECT
PRI . ORDER
DELETE ALL
PLAYBACK SET
CARD
RETURN
EXECUTE
DELETEDELETE
NORMAL
100 0012-100 0012-
22
PAGE
1211
10
9
8
7
SET
as
SET
RETURN
qw
SET
qw
CANCEL
SET
as
1 1 2
qw
NORMAL
22
PAGE
100 0010-100 0010-
PROT ECTPROTECT
1211
10
9
8
7
CANCEL RETURN
qw