Sharp ViewCam-Slim VL-ME10S - Selecting the Audio Playback Mode

69
Advanced
Features
Advanced Features
Playback
Selecting the Audio Playback
Mode
Available mode: TAPE-VCR
You can select any of the following audio
playback modes to listen to the dubbed audio.
Audio 1+2
• 12-bit audio recording in stereo (Audio 1 and
Audio 2 channels)
• 16-bit audio recording in stereo (left and right
channels)
Audio 1
• 12-bit audio recording in stereo (Audio 1
channel only)
• 16-bit audio recording in mono (left channel
only)
Audio 2
• 12-bit audio recording in stereo (Audio 2
channel only)
• 16-bit audio recording in mono (right channel
only)
1 Play back a Mini DV cassette with
dubbed audio.
2 Press the MENU/DISPLAY button until
the menu screen appears.
3 Select V, then press SET. Select
“AUDIO” (1), then press SET (2).
4 Press f or d to select the desired
audio playback mode, then press SET.
1
1
2
2
+
AUDIO DUB
PIC.
EFFECT
AUDIO
PB EFFECT
PLAYBACK SET
M ULTI FRAME
RETURN
SET
as
AUDIO
12
+
5 Press the MENU/DISPLAY button to
turn off the menu screen.
• The selected audio playback mode
indicator is displayed.
Note:
• The audio playback mode indicator, “AUDIO”, is
displayed in different colours depending on the
recording mode (12- or 16-bit) used for the
recording being played back. A white display
indicates 12-bit recording mode, and a green
display, 16-bit recording mode.
SP
AUTO
TO
AUDIO 1 2
+
AUDIO 12
+
e
y
r
d
GAMMA
Audio playback
mode indicator
SET
as
1 1 2