iii
Quick Operation Guide
Camera Recording on Tape
1 Make sure that a Mini DV cassette is
inserted.
2 Remove the lens cap. Pull out the
viewfinder completely or open the LCD
monitor.
3 Set the Media Selection
switch to TAPE.
4 Hold down the Lock
button and set the
POWER switch to
CAMERA.
5 Press the Power Zoom T (Telephoto) or
W (Wide angle) button to zoom in on or
out from the subject.
6 Press the REC START/STOP button to
begin recording.
REC
Lock button
To pause recording
Press the REC START/STOP button again.
To turn the power off
Set the POWER switch to OFF without pressing
the Lock button.
Tape Playback
1 Make sure that the recorded Mini DV
cassette is inserted.
2 Open the LCD monitor and adjust the
angle.
3 Set the Media Selection
switch to TAPE.
4 Hold down the Lock
button and set the
POWER switch to VCR.
5 Press e (or r) to rewind (or fast
forward) the tape to the desired point.
6 Press y to begin playback.
To stop playback
Press b.
Power Zoom buttons
Media Selection switch
REC START/STOP button
POWER switch
Lock button
e
y
r
y
To Next Page
Loading...
