Sharp ViewCam-Slim VL-ME10S - Page 73

56
Advanced
Features
6 Turn the CONTROL dial up or down (1)
to focus on the subject, then press the
CONTROL dial (2).
• Turning the CONTROL dial up ( ):
To focus far
• Turning the CONTROL dial down ( ):
To focus near
7 Press the CONTROL dial to lock the
focus.
Manual focus indicator
MANUAL
FOCUS
MANUAL MF
MF
FOCUS
AUTO
SET
SP
33
min
min
0 min 0
33
min
min
0 min 0
GAMMA FADE SRCH
GAMMA FADE SRCH
M AN. FOCUS M ANUAL
EXPOSURE
SHUT. SPEED
PIC. EFFECT
SCENE MENU
QK. RETURN
DIS
MANUAL SET
RETURN
SET
as
8 Press the MENU/DISPLAY button to
turn off the menu screen.
•“MF” is displayed.
To cancel Manual Focus mode
After performing step 4 above, select “AUTO”,
then press SET.
Notes:
• The camcorder may not be able to focus
correctly if the subject is within approximately
1.5 m. Set the zoom control to wide angle, and
then try refocusing.
• If the lens is dirty or fogged, the camcorder may
not be able to correctly focus.
• When “MF” is displayed, you can manually
adjust the focus by turning the CONTROL dial
up or down, even if the focus setting screen is
not displayed.
GAMMA FADE SRCH
SP
SP
33 min
min
0 min 0
MANUAL MF
1
2