Sharp ViewcamZ VL-Z950E-A

Preparation
Preparation
16
Using the Lens Cap
Attach the strap of the lens cap to the hand
strap as shown below.
When attaching or removing the lens cap,
grasp the indents on both sides of the cap.
When recording, remove the lens cap and
attach the lens cap cord to the fastener so
that the cap will not get in the way.
Note:
• Always attach the lens cap over the lens
when not using the camcorder.
Fastener
Indents
VL-Z950E-E-006-021 04.2.5, 1:31 PM16