Sharp ViewcamZ VL-Z950E-A User Manual

Useful Features
Camera Recording
Useful Features
46
Self recording with reversed
grip
Available mode:
Tape Camera
Rotate the grip 105° and the LCD monitor
180° vertically so that you can record
yourself while holding the grip.
3 Open the LCD monitor to a 90° angle
to the camcorder body (1), and then
rotate it 180° vertically (2).
4 Set the Media Selection switch to V.
5 Set the Power switch to v.
6 Begin recording.
Notes:
• Do not rotate the monitor section to the self
recording position during recording or
playback.
• During self recording with reversed grip, the
mode or menu screen cannot be displayed.
• All of the manual settings are set to AUTO
and some other settings will set to OFF in self
recording with reversed grip.
• You may experience image noise when using
self recording with reversed grip.
• To operate self recording with reversed grip
correctly, make sure to turn the grip and the
lens section so that the Record Start/Stop
button and the tripod socket face upward,
and the lens faces toward you. The I
indicator will appear.
• Be sure that the LCD monitor rotation is
exactly 180°, otherwise the image recorded
will be rotated 180° upside-down.
• In self recording with reversed grip in Card
Camera mode, the still images will be
recorded rotated 180° upside down. The J
indicator will appear in this case.
• The viewfinder does not work in self
recording with reversed grip.
• It is recommended to set the LED video light
to “OFF” in self recording.
1 Turn the camcorder downward as
shown below.
2 Rotate the lens section 105° vertically
as shown below.
105°
90°
180°
VL-Z950E-E-040-050 04.2.5, 1:35 PM46

Sharp ViewcamZ VL-Z950E-A Specifications

General

Brand	Sharp
Model	ViewcamZ VL-Z950E-A
Category	Camcorder
Language	English