Sharp ViewcamZ VL-Z950E-A

Useful Features
Camera Recording
Useful Features
48
Selecting the 16-bit
Audio Recording
Mode
Available mode:
Tape Camera
The camcorder normally records audio in
the 12-bit audio recording mode. For higher-
quality audio recording, select the 16-bit
audio recording mode.
1 In Tape Camera mode, press the
MENU button to display the menu
screen.
2 Press l or m on the Operation
button to select Y, then press the
centre of the Operation button.
3 Press l or m to select “AUDIO
MODE”, then press the centre of the
Operation button.
4 Press l or m to select “16bit”, then
press the centre of the Operation
button.
5 Press the MENU button to turn off the
menu screen.
• The 16-bit audio recording mode
indicator only appears when the on-
screen indicators are turned on.
To return to 12-bit audio recording
mode
Select “12bit” in step 4 above.
Note:
• When using Audio Dubbing with 16-bit audio
recordings, both the dubbed and original
sounds will be recorded in mono (see page
69).
1 6bit
AUD I O MODE
SETT ING 2
DIS
AUD I O MODE
RETURN
PHONES VOL
W IND
1
1
2
6
bit
bit
T A P E
16 bit
PAUSE
16-bit audio recording mode indicator
VL-Z950E-E-040-050 04.2.5, 1:35 PM48