EasyManua.ls Logo

Sharp ViewcamZ VL-Z950E-A

Sharp ViewcamZ VL-Z950E-A
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced Features
69
Audio Dubbing
Feature
Available mode:
Tape Playback
You can add narration to recordings made
with this camcorder, while preserving the
original audio and video recordings.
Microphone for Audio Dubbing
You can use the built-in stereo microphone
to record narration.
Notes:
Audio dubbing does not function through the
DV terminal.
You cannot use audio dubbing with
recordings made in LP mode.
You cannot use the built-in stereo microphone
for audio dubbing when the audio/video/S-
video cable is connected.
You cannot use the zoom microphone to
record narration.
Audio Recording
In normal recording mode
12-bit audio recording
The audio is recorded in stereo on Audio 1.
Audio 1: Stereo (left and right) sound
Audio 2: No audio
16-bit audio recording
The audio is recorded in stereo with the left
and right sound on two separate channels.
Audio 1: Left sound
Audio 2: Right sound
In Audio Dubbing mode
12-bit audio recording
The dubbed audio is recorded on Audio 2.
Audio 1: Original stereo (left and right)
sound
Audio 2: Dubbed stereo (left and right)
sound
16-bit audio recording
The dubbed audio is recorded on Audio 2
over the original right sound. Both dubbed
and original sounds are mono.
Audio 1: Original left sound
Audio 2: Dubbed sound
Notes:
You can select the 12-bit or 16-bit audio
recording mode by performing the procedure
on page 48.
You can perform audio dubbing, such as
music, on Audio 2 if you connect another
source via the AV cable. If the audio to be
dubbed was recorded in 12-bit audio
recording mode, it can be recorded on Audio
2 in stereo sound.
Built-in stereo
microphone
VL-Z950E-E-068-077 04.2.5, 1:38 PM69

Table of Contents

Related product manuals