Sharp ViewcamZ VL-Z950E-A User Manual

Useful Features
55
Rotate Playback
Available mode:
Tape Playback
This function allows you to play back
images rotated 180°.
1 In Tape Playback mode, press the
MENU button to display the menu
screen.
2 Press l or m on the Operation
button to select V, then press the
centre of the Operation button.
3 Press l or m to select “ROTATE
PB”, then press the centre of the
Operation button.
• Rotate playback indicator appears.
4 Press m to begin rotate playback.
• The image is rotated 180° upside
down.
To cancel rotate playback
Press the centre of the Operation button
in step 4 above.
PLAYBACK
AUDI O
ANLG OFFDGTL
RETURN
SET
EXECUTEROTATE PB
AUDIO
ROT AT E PB
21
+
1
+
2
Notes:
• When executing rotate playback during Tape
Playback, playback will stop. Press m to
begin rotate playback.
• Even if the camcorder is in rotate playback
mode, the image output via a DV connection
will display as normal playback.
• When you want to display the menu screen
during rotate playback, press the centre of
the Operation button.
• In rotate playback mode, you cannot perform
frame advance, slow, and picture effect
playback or copy an image from tape to
card.
Fine Picture Playback
Available mode:
Tape Playback
Fine picture playback improves the image in
Tape Playback mode by increasing the
brightness of the subject while leaving the
brighter portions of the image unaffected.
1 In Tape Playback mode, press the
DISPLAY/MODE SET button until the
mode screen appears.
2 Press l or m on the Operation
button to select “FINE PIC.”, then
press the centre of the Operation
button.
OFF
AUD I O DUB
STRETCH PB
F I NE P I C.
PIC. EFFECT
Rotate playback indicator
(Continued on the next page)
VL-Z950E-E-051-057 04.2.5, 1:35 PM55

Sharp ViewcamZ VL-Z950E-A Specifications

General

Brand	Sharp
Model	ViewcamZ VL-Z950E-A
Category	Camcorder
Language	English