Sharp XE-A213

52
AUXILIARY FUNCTION PROGRAMMING
The cash register provides miscellaneous keys such as
-
,
%
,
V
,
r
,
o
,
X
,
Y
,
c
,
b
and
A
.
Miscellaneous keys are programmed in one procedure with guidance messages except for the
A
key.
• To keep current setting on each programming, press the
s
key when the corresponding
guidance message is firstly displayed.
• When pressing the
A
key in the middle of procedure, the programming will terminate and the
data you entered before the press of
A
is saved.
• When pressing the
l
key twice in the middle of procedure, the programming will terminate and
the data you entered before pressing the
l
key twice is NOT saved.
• When pressing the department, PLU,
-
,
%
,
V
,
r
,
o
,
X
,
Y
,
c
or
b
key in the middle
of procedure except while entering texts or prices, the programming will move to the pressed key
programming.
Programming for
-
1. Specify the key to program.
2. Text programming (Press
s
to skip. / Press
A
to terminate.)
3. Amount programming (Press
s
to skip. / Press
A
to terminate.)
300
300
(1) Enter the amount using numeric keys.
A maximum of 6 digits can be set.
Default setting is 0.
ENTER AMOUNT
-0.00
s
(3) Press the
s
key to register the text.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
(-)
(-)
(2) Enter the text.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 14 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Pressing the
P
and
@
key moves the cursor to
the right and left respectively.
ENTER TEXT
=(=-=)
:
(1) Press
:
key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
(-) PROGRAMMING
ENTER[00]KEY
-
(1) Press the
-
to enter
-
programming.
Immediately after displaying "(-) PROGRAMMING",
guidance message for the next step will be displayed.
Operator displayKey operation
Miscellaneous Key Programming
1
A213_3 FOR THE MANAGER(SEEG) 06.4.28 8:33 PM Page 52