Sharp XE-A213 - Print and Receipt Format Settings

67
Part3
FOR THE MANAGER
Part2Part1
PLU level shift and GLU function parameters
Job code: 15
* Item: Selection: Entry:
A PLU level shift mode Automatic return mode* 0
Lock shift mode 1
B PLU level shift operation availability Available in MGR & REG modes* 0
Available in MGR mode 1
C PLU level shift timing for returning to 1 item* 0
level 1 in automatic return mode 1 transaction 1
D Checking clerk code on guest check Yes 0
when a reorder is made No* 1
E Printing of previous and new balances on Yes 0
G.C. receipt No* 1
F Clearing details in GLU buffer at a press No* 0
of ˜ Yes 1
G Clearing details in GLU buffer at a press No 0
of ˝ Yes* 1
H Always enter 0. 0
Other programming
As the guidance messages for other programming, “OTHERS + the lower digit number of job code”
is displayed. For example, for job code 61, “OTHERS 1” is displayed as the guidance message.
Job code: 61
* Item: Selection: Entry:
A Always enter 0. 0
B Always enter 0. 0
C Negative dept. and PLU/subdept. Disable 0
Enable* 1
D Fractional treatment Round off (4 down, 5 up)* 0
Raising to unit 1
Disregarding fractional treatment 2
E Use of
:
key As 00 key* 0
As 000 key 1
F Time format 12-hour format 0
24-hour format* 1
G Date format Use month-day-year format 0
Use day-month-year format* 1
Use year-month-day format 2
H Position of decimal point (from right) (TAB) 0 to 3 (default: 2)
A213_3 FOR THE MANAGER(SEEG) 06.4.28 8:33 PM Page 67