Sharp XE-A213 - Register Number and Consecutive Number Programming; Register Number Setting; Consecutive Number Setting

65
Part3
FOR THE MANAGER
Part2Part1
The cash register provides various detailed functions listed below.
• Function selection for miscellaneous keys
• Print format
• Receipt print format
• PLU level shift and GLU function parameters
• Others
For this programming, the job code entry style is applied. You can continue programming until you press the
A
key for the programming described in this section. To continue programming, repeat from a job code entry.
*1 Enter job code using numeric keys specified in each section below.
*2 Data entry details are listed on each table in each section below. An asterisk is entered for factory setting.
Example: When programming for job code 5 as ABCDEFGH: 00000100.
Function selection for miscellaneous keys
Job code: 5
* Item: Selection: Entry:
A Paid-out in the REG mode Enable* 0
Disable 1
B Received on account in the REG mode Enable* 0
Disable 1
C Subtotal void in the REG mode Enable* 0
Disable 1
D Indirect void in the REG mode Enable* 0
Disable 1
E Direct void in the REG mode Enable* 0
Disable 1
F Refund entry in the REG mode Enable* 0
Disable 1
G No sale in the REG mode Enable* 0
Disable 1
H Fractional quantity entry Enable (3 digits decimal place) 0
Disable* 1
s
5
@
00000100
sA
PrintKey operation example
s@
*
2
ABCDEFGH*
1
Job code
As
To set 00000000
Various Function Selection Programming 1
2
A213_3 FOR THE MANAGER(SEEG) 06.4.28 8:33 PM Page 65