TABLE OF CONTENTS
Chapter 1. Introduction
1.1 Directions for using the unit.............................................................................. 1-2
1.2 Document List.................................................................................................... 1-7
Chapter 2. Outline
2.1 Name of Each Part of the Unit........................................................................... 2-2
2.2 Name of Each Circuit Board and Layout of the Circuit Boards ....................... 2-4
2.3 Conditions for Installation (using)..................................................................... 2-6
2.4 Conditions for Transportation and Storage...................................................... 2-7
Chapter 3. Parations for installation
3.1 Tools Required for Installation.......................................................................... 3-2
3.2 Unpacking .......................................................................................................... 3-3
3.3 How to Open/Close the Covers ......................................................................... 3-5
Chapter 4. Installation
4.1 Preinstallation Procedures................................................................................ 4-3
4.2 Installation Procedures...................................................................................... 4-4
4.3 Assemble for the CXDI-50G............................................................................... 4-5
4.4 Installation of CXDI Control S/W ....................................................................... 4-9
4.5 Setup of CXDI..................................................................................................... 4-11
4.6 Installation of CXDI Generator Communication S/W........................................ 4-16
4.7 Setup of CXDI Generator Communication S/W................................................. 4-19
4.8 Check of CXDI Generator Communication S/W................................................ 4-27
4.9 Use permission setting of external storage medium........................................ 4-27
4.10 Installation of MLT-M S/W (optional)............................................................... 4-34
4.11 Check of MLT-M S/W (optional)....................................................................... 4-35
4.12 Calibration........................................................................................................ 4-37
4.13 Selftest.............................................................................................................. 4-39
4.14 Installation of DMW-PS (optional) ................................................................... 4-39
4.15 Setup of DMW-PS (optional)............................................................................ 4-40
4.16 Check of DMW-PS function (optional)............................................................. 4-40
4.17 Setup of annotation.......................................................................................... 4-40
4.18 Setup of DICOM storage and print .................................................................. 4-40
4.19 Acquisition of image with phantom ................................................................ 4-41
4.20 Check of REX value.......................................................................................... 4-41
4.21 Check of DICOM storage and print function................................................... 4-41
4.22 Check of image ................................................................................................ 4-41
4.23 Check table....................................................................................................... 4-42
4.24 Removement of 50G and Power Box from MUX-100D.................................... 4-43
4.25 Packing and sending MUX-100D and 50G....................................................... 4-43
4.26 Adjustment of Image quality............................................................................ 4-43
4.27 Installing the arm cover................................................................................... 4-44