Shure MXW Series - Configuration Tab

41
Software
① Device List
Displays all devices on the network that are in the Configuration or are
open for association.
② Device Name
Device names can be customized with up to 31 characters.
③ Interface Selection
View and adjust IP settings for the device's network interface(s). See
the Networking section for configuring each MXW device.
• Control: Shure control (software interface operation, firmware
updates, Shure Device Discovery application).
• Network Audio: Dante network audio (digital audio networking and
Dante software).
④ IP Mode
Sets IP mode of the selected network interface:
• Auto (DHCP): For automatic assignment of IP addresses.
• Manual (Static): For Static IP addresses.
⑤ IP Settings
View and edit the IP Address, Subnet Mask, and Gateway for each
network interface.
⑥ MAC Address
The network interface's unique identification.
⑦ Group Row
Each row represents a Group in the Configuration. Select an APT and
associate chargers and audio output devices to form each Group.
⑧ ID Button
Commands the selected device's LEDs to flash for easy identification.
⑨ Link Button
Links all microphones in the charger to channels in the associated
Group.
Configuration Tab
①
②
④
⑤
③
⑥
⑦
⑧⑨