47
Software
Dante
tm
Software by Audinate
Audinate software provides additional function and control of the Dante
tm
digital audio network. Visit Audinate's website for instructions for download and
installation.
Dante Controller
Dante Controller (DC) is free software by Audinate that is used to configure and manage a network of Dante devices. Use it to route channels between Dante-
enabled devices and to monitor the status of the device, clock, and network.
Important: The MXWAPT must be the Dante clock master for the network. Do not change the clock master from the MXWAPT (default selection) to
another device.
Note: DC software is not required for routing audio within the MXW system. Use caution when using DC, as changing settings may interfere with MXW
system functionality.
Dante Virtual Soundcard
Dante Virtual Soundcard (DVS) acts as an audio driver used to monitor and record digital audio without additional equipment. DVS uses a computer's
standard Ethernet ports to transmit and receive up to 64 channels from any Dante enabled device on the same network.
To Next Page
Loading...
