Sicam SBM 855 - English

656 229 2010-11-22| Sicam snc società unipersonale
26 | SBM 855 | en
Contents
1. Symbols used 27
1.1 In the documentation 27
1.1.1 Warning notices - Structure and
meaning 27
1.1.2 Symbols in this documentation 27
1.2 On the product 27
2. User information 28
2.1 Important notes 28
2.2 Safety instructions 28
2.3 Electromagnetic compatibility (EMC) 28
3. Product description 28
3.1 Intended use 28
3.2 Prerequisites 28
3.3 Scope of delivery 28
3.4 Special accessories 28
3.5 SBM 855 29
4. Commissioning 30
4.1 Unpacking 30
4.2 Set-up 30
4.3 Fixing the control panel in position and
connection 30
4.4 Fitting the wheel guard 31
4.5 Electrical connection 31
4.6 Checking the direction of rotation 31
6.5 Compressed air connection 32
6.6 Calibration of SBM 855 32
5. Fitting and removing the fl ange 32
5.1 Removing the fl ange 32
5.2 Fitting the passenger vehicle fl ange 33
5.3 Fitting the commercial vehicle fl ange 33
6. Fitting and removing the wheel 34
6.1 Passenger vehicle wheel attachment 34
6.2 Removing the passenger vehicle wheel 34
6.3 Commercial vehicle wheel attachment 35
6.4 Removing the commercial vehicle wheel 35
7. Operation 36
7.1 Control/display panel 36
7.1.1 Overview of LEDs 36
7.1.2 Control keys 36
7.2 Balancing programs 36
8. Wheel balancing 37
8.1 Selection of balancing program 37
8.2 Entering the wheel data 37
8.3 Measuring unbalance 38
8.4 Attaching balance weights 38
8.4.1 Splitting balance weights
(split program) 38
8.4.2 Clip-on weights and adhesive weights
without ALUDATA® 38
8.5 Manual vernier caliper 39
8.5.1 Determining rim width 39
8.5.2 Attaching balance weights 39
9. Minimizing unbalance (Commercial vehicle
wheel) 40
10. Settings 41
10.1 User settings 41
10.2 Basic settings 41
11. Faults 42
12. Maintenance 44
12.1 Recommended lubricants/oil mist lubricator 44
12.2 Cleaning and servicing 44
12.2.1 Service intervals 44
12.2.2 Removing condensate 44
12.2.3 Topping up oil in oil mist lubricator 44
12.2.4 Replacing oil in oil mist lubricator 44
12.3 Spare and wearing parts 44
12.4 Calibration 45
12.4.1 Call-up of calibration menu 45
12.4.2 Shaft unbalance correction 45
12.4.3 SBM 855 calibration 45
12.4.4 Reference measurement 46
12.5 Self-diagnosis 46
13. Decommissioning 47
13.1 Temporary shutdown 47
13.2 Change of location 47
13.3 Disposal and scrapping 47
13.3.1 Substances hazardous to water 47
13.3.2 SBM 855 and accessories 47
14. Technical data 47
14.1 SBM 855 47
14.2 Dimensions and weight 47
14.3 Application range 47