656 229 2010-11-22| Sicam snc società unipersonale
Decommissioning | SBM 855 | 47 en
13. Decommissioning
Bolt the SBM 855 back onto the pallet.
Unplug the electrical connection.
13.1 Temporary shutdown
In the event of lengthy periods of non-use:
13.2 Change of location
If the SBM 855 is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
The SBM 855 is only ever to be transported in the
original or equivalent packaging.
Unplug the electrical connection.
Heed the notes on initial commissioning.
13.3 Disposal and scrapping
13.3.1 Substances hazardous to water
! Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
The SBM 855 is subject to the European direc-
tive 2002/96/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
Make use of the local return and collection
systems for disposal.
Proper disposal of the SBM 855 prevents
environmental pollution and possible health
hazards.
1. Disconnect the SBM 855 from the mains and detach
the power cord.
2. Dismantle the SBM 855 and sort out and dispose of
the different materials in accordance with the ap-
plicable regulations.
13.3.2 SBM 855 and accessories
Unfasten the compressed air connection.
Unfasten the compressed air connection.
14. Technical data
14.1 SBM 855
Function Specification
Passenger vehicle wheel
balancing speed
190 U/min 50 Hz /
230 U/min 60 Hz
Commercial vehicle wheel
balancing speed
42 - 100 U/min
Passenger vehicle wheel
measurement resolution
1/5 g (0.01/0.25 oz)
Commercial vehicle wheel measu-
rement resolution
10/50 g (0.1/1.0 oz)
Noise level < 75 dB
Power output 0,7 kW
Voltage Depending on voltage
ordered
(refer to rating plate)
Degree of protection IP 22
Pneumatic connection 800 - 1200 kPa (8-12 bar)
i The unbalance is indicated by a 3-digit display. The
unit - ounces (oz) or grams (g) - can be selected by
way of the <MENU> key (refer to Section 10).
14.2 Dimensions and weight
Function Specification
SBM 855 (H x W x D) max. 1950 x 2000 x 1350 mm
Weight 183 kg
500
900
500
2000
1950
1350
651044-03 _Mi
14.3 Application range
Function min – max
Rim width 1" – 20"
Rim diameter 10" – 30"
Maximum wheel diameter 1200 mm
Maximum wheel width 650 mm
Maximum wheel weight 160 kg
Maximum lift height 440 mm
To Next Page
Loading...
