112 S 63 E - S 63 E C Operator's Manual
11. PROGRAM FOR SPLITTING THE
WEIGHT ON EITHER SIDE OF THE
SPOKE “SPLIT WEIGHT” (ONLY WITH
MOTORCYCLE PROGRAMMES)
Some rims have spokes so wide that it is not possible to place adhesive weights next
to them; for this reason, the Split Weight programme devices the counterweights into
two parts.
To use this programme, proceed as follows:
- Turn the wheel until the central element of the external side position indicator lights
up.
It is recommended to keep the wheel in position using the pedal brake
- Press the key to activate the programme
Programme activation is indicated by the illumination of the LED on the dis-
play panel.
- use the keys to select the spoke width
1 small
2 medium
3 large
OFF deactivates the programme;
- confirm with the key.
- apply two new counterweights in the positions indicated.
In the motorcycle balancing programmes, the weight division operation can be per-
formed on both balancing sides.
To Next Page
Loading...
