120 S 63 E - S 63 E C Operator's Manual
Press the button to search for the second side position with the guard raised.
Proceed as follows to deactivate the automatic position search programme:
- Press the key.
- use the keys to search for SEt UP
- press the key to confirm
- use the keys to search for rPA on (or rPA oFF if previously set)
- press the key to change the setting:
or rPA on to enable the Automatic Position Search programme
or rPA oFF to disable the Automatic Position Search programme
- press the key to confirm and exit.
15.5. SET UP - WARNING OPT
The machine indicates the need to perform an unbalance optimisation procedure (OPT)
with the flashing LED on the display panel.
Proceed as follows to disable this function:
- Press the key.
- use the keys to search for SEt UP
- press the key to confirm
- use the keys to search for OPt on (OPt oFF if disabled)
- press the key to change the setting:
To Next Page
Loading...
