SICE S 63 E - Main Features

84 S 63 E - S 63 E C Operator's Manual
Key to caution and instruction labels
Never use the wheel spin shaft as a lifting point for the machine.
Unplug the power supply plug before performing any maintenance/
repair operations on the machine.
Do not lift up the guard when the wheel is turning.
Please use centring accessories with hole diameter 40 mm.
MAIN FEATURES
- Low balancing speed:
• minimises wheel spin times;
• reduces risk due to rotating parts;
• saves energy.
- Automatic sensor for measuring the distance and diameter
- SMART-ARM plus system, ie laser line within the automatic detection arm to indicate
balancing plane acquisition position (available on request).
- AWD (Auto Width Device) programme for measuring the width using an ultrasonic sensor
(if fitted).
- “AWC” (Auto Width Calculation) programme for enabling the manual insertion of the
width.
- Automatic brake for stopping the wheel at the end of the spin.
- Wheel-holder shaft locking brake
- STOP button to stop the machine immediately.
- Side flange holders.
- Top tray to take weights of all types.
- Automatic start by lowering the guard.
- Luminous digital display unit double display and 3D graphics.