SICE S 63 E - Set up - Brightness Display Setting; Set up - Led Light

Operator's Manual S 63 E - S 63 E C 125
15.10. SET UP - BRIGHTNESS DISPLAY
SETTING
The machine allows the operator to change the brightness of the display according to
your needs.
To do this, you must:
- Press the key.
- use the keys to search for SEt UP
- press the key to confirm
- use the keys to search for dSP -3- (factory setting)
- press the key to change the setting:
- 1 - Minimum display brightness value
- 8- maximum display brightness value
- press the key to confirm and exit.
15.11. SET UP - LED LIGHT
The machine allows the operator to disable or modify the lighting mode.
Proceed as follows to make these settings:
- Press the key.
- use the keys to search for SEt UP
- press the key to confirm
- use the keys to search for LEd 1 (LEd 2 or LEd oFF if previously set)
- press the key to change the setting:
or LEd oFF to disable the lighting device