SICE S 63 E - Set up - Beeper

122 S 63 E - S 63 E C Operator's Manual
- use the keys to search for SEt UP
- press the key to confirm
- use the keys to search for -b- in (-b- MM if the display in millimetres is
enabled)
- press the key to change the setting:
or -b- MM to activate the display in millimetres
or -b- in to activate the display in inches
- press the key to confirm and exit.
15.8. SET UP - BEEPER
The machine can be configured to beep each time a key is pressed on the keypad.
Proceed as follows to modify this configuration:
- Press the key.
- use the keys to search for SEt UP
- press the key to confirm
- use the keys to search for biP on (biP oFF if the beeper is disabled)
- press the key to change the setting:
or biP on to activate the beeper
or biP oFF to deactivate the beeper
- press the key to confirm and exit.