SICE S 63 E - Set up - Rim Diameter Visualisation Measurement Unit; Set up

To Next Page

To Previous Page

Operator's Manual S 63 E - S 63 E C 121

or OPt on to activate the display of the alarm indicator light

or OPt oFF to deactivate the display of the alarm indicator light

- press the key to conﬁrm and exit.

15.6. SET UP - RIM DIAMETER

VISUALISATION MEASUREMENT UNIT

The machine may be set to display the rim diameter unit of measurement in inches or

millimetres.

Proceed as follows to modify this conﬁguration:

- Press the key.

- use the keys to search for SEt UP

- press the key to conﬁrm

- use the keys to search for -d- in (-d- MM if the display in millimetres is

enabled)

- press the key to change the setting:

or -d- MM to activate the display in millimetres

or -d- in to activate the display in inches

- press the key to conﬁrm and exit.

15.7. SET UP - RIM WIDTH VISUALISATION

MEASUREMENT UNIT

The machine may be set to display the rim width unit of measurement in inches or millimetres.

Proceed as follows to modify this conﬁguration:

- Press the key.

SICE S 63 E - Set up - Rim Diameter Visualisation Measurement Unit; Set up - Rim Width Visualisation Measurement Unit