OPERATING INSTRUCTIONS | CFP CUBIC8021989 / 2017-10-20 | SICK AG
Subject to change without notice
43
10OVERVIEW OF PARAMETERS
Parameter Description
SigQa3 See “8.5.10 Evaluating signal quality”.
SigQa4 See “8.5.10 Evaluating signal quality”.
FrmVer Shows the rmware version.
SerNo Shows the serial number.
AppTag Measuring point name, can only be written via IO-Link.
DevTag Device name, can only be written via IO-Link.
RstFac Reset the set parameters to the factory settings.
Passwd Currently no function.
To Next Page
Loading...
