What does 'Warning: Temperature' mean for SICK DT1000 Accessories, and how do I resolve it?
If your SICK Accessories display a 'Warning: Temperature', it means the internal device temperature is outside the warning limits. You should lower the ambient temperature of the sensor.
How to fix a firmware warning on SICK DT1000 Accessories?
If your SICK Accessories are showing a 'Firmware warning', this indicates that a firmware update has failed. To resolve this, avoid interrupting the power supply and repeat the firmware update process.
What causes ambient light error in SICK DT1000 Accessories, and how can I fix it?
If you are getting an 'Ambient light error' with your SICK Accessories, it means the sensor is failing due to excessive ambient light. Protect the sensor from ambient light by using a protection tube.
What does 'Warning: Laser' mean for SICK DT1000 Accessories, and what should I do?
If you see a 'Warning: Laser' message on your SICK Accessories, it indicates the laser is aging. Keep a replacement device ready for use.
What causes measurement error in SICK DT1000?
If you are experiencing a 'Measurement error' with your SICK Accessories, it is likely due to optical interference. You should check the measurement section.
Defines the Dx1000 distance sensor as an opto-electronic device for non-contact distance measurement.
Details prohibited uses and warns against situations outside technical specifications.
Warns that unauthorized modifications can lead to dangers and void warranty.
Highlights specific operational risks like laser radiation and hot surfaces.
Details laser safety classifications and precautions for the measurement and alignment lasers.
Warns that the front screen can become hot due to the heater.
Step-by-step guide for installing the distance sensor.
Highlights critical safety precautions for electrical installation.
Provides essential guidelines for proper electrical wiring.
Step-by-step instructions for making electrical connections.
Covers parameters related to measurement mode, cycle time, and filters.
Details basic parameter settings for measurement tasks.
Provides advanced parameters for optimizing measurement performance.
Contains settings for configuring the device's various interfaces.
Sets the distance threshold for triggering a switching event.
Contains settings for configuring serial and network communication.
Lists key performance specifications like measuring range and accuracy.
Visual representations of the device's measuring range under different conditions.
Details the specifications and capabilities of the device's interfaces.
General| Housing Material | Aluminum |
|---|---|
| Type | Distance sensor |
| Supply Voltage | 10 V DC to 30 V DC |
| Protection Class | IP67 |
| Laser Class | Class 2 |
| Operating Voltage | 10 V DC to 30 V DC |
To Next Page
