13
OPERATING INSTRUCTIONS | DUSTHUNTER SB30
8014551/1COY/3-0/
2016-08| SICK
Subject to change without notice
PRODUCT DESCRIPTION 2
2.2 Device components
Measuring system DUSTHUNTER SB comprises the components:
● Sender/receiver unit DHSB30
● Flange with tube
● Optional MCU control unit MCU (details upon request)
to control, evaluate and output the data of the sender/receiver unit connect
ed via the
RS
485 interface
– With integrated purge air supply, for internal duct pressure -50 ... +2 hPa
– Without purge air supply, therefore additionally required:
● Optional external purge air unit, for internal duct pressure -50 ... +30 hPa
● Optional SCU (details on request)
for operating several measuring systems
To Next Page
Loading...