58
OPERATING INSTRUCTIONS | DUSTHUNTER SB30
8014551/
1COY/3-0/2016-08| SICK
Subject to change without notice
6 TROUBLESHOOTING
6Troubleshooting
6.1 General
“Diagnosis / Error messages/warnings” provides detailed information on the current
device state. To display, connect the measuring system to SOPAS ET and start the device
file “DH SB30”.
Move the mouse to the respective message to display more details on the significance of
individual messages in a separate window. Clicking on the display shows a short
description of possible causes and corrections under “Help” (see “Warning and error mes-
sages in SOPAS ET”, page 59).
Warning messages are output when internal limits for individual device functions/
components are reached or exceeded which can then lead to erroneous measured values
or an imminent failure of the measuring system.
Warning messages do not imply a malfunction of the measuring system. The current
measured value continues to be output on the analog output.
See the Service Manual for a detailed description of messages and options for clear-
ance.
To Next Page
Loading...