26
OPERATING INSTRUCTIONS | DUSTHUNTER SB30
8014551/
1COY/3-0/2016-08| SICK
Subject to change without notice
3 ASSEMBLY AND INSTALLATION
3.2.4 Assembly work
▸ Prepare holder (see “Purge air unit layout and assembly dimensions (dimensions in
mm
)”, page 26).
▸ Fasten purge air unit with 4 M8 screws.
▸ Check whether the filter element is fitted in the filter housing otherwise fit when
n
ecessary.
Fig. 11: Purge air unit layout and assembly dimensions (dimensions in mm)
> 140
Clearance to fit weatherproof cover
Flange with tube
Clearance to exchange filter
element
Alternative: Mounting bracket
Steel pipe 50 x 5 DIN 2391
Duct
(550)
470
50
M 8
> 160
(550)
470
To Next Page
Loading...