69
OPERATING INSTRUCTIONS | DUSTHUNTER SB30
8014551/1COY/3-0/
2016-08| SICK
Subject to change without notice
SPECIFICATIONS 7
7.4 Accessories
7.4.1 Connections for sender/receiver unit
7.4.2 Line sender/receiver unit - MCU
7.4.3 Purge air supply
7.4.4 Assembly parts
7.4.5 Device check accessories
7.5 Consumable parts for 2-years operation
Designation
Part No.
7-pole socket for connection of power supply (plug connector 1)
6049886
7-pole plug for connection of AO and status signals (plug connector 2)
6049036
5-pole socket for connection of DI and Service (plug connector 3)
6009719
Designation
Part No.
Connection line, length 5 m
7042017
Connection line, length 10 m
7042018
Connection line, length 5 m for CAN bus connection
2043678
Connection line, length 10 m for CAN bus connection
2043679
Designation
Part No.
Non-return valve DN40
2035098
Purge air hose DN 40, sold by the meter
5304683
Hose clamp D32-52
5300809
Purge air heater with enclosure for fitting outdoors
230 V AC, 50/60 Hz, 3000 W, 1 ph
2021514
Purge air heater with enclosure for fitting outdoors
120 V AC, 50/60 Hz, 2200 W, 1 ph
2021513
Designation
Part No.
Assembly kit
2048677
Designation
Part No.
USB-RS485 adapter
2040718
Check filter set
2042339
Optic carrier for linearity test DUSTHUNTER SB50
2048281
Adjusting stand
2042907
7-pole connection line for CAN bus, length 5 m
2043678
Designation
Number Part No.
Filter element Micro-Topelement C11 100
4 5306091
Optics cloth (for optional external purge air unit)
4 4003353
To Next Page
Loading...