22
OPERATING INSTRUCTIONS | DUSTHUNTER SB30
8014551/
1COY/3-0/2016-08| SICK
Subject to change without notice
3 ASSEMBLY AND INSTALLATION
Plan calibra-
tion openings
Access Easy and safe
Provide platforms or pedestals as
required
Distances to measuring
level
No mutual interference between
calibration probe and measuring sys-
tem
Plan sufficient distance between
measuring and calibration level
(approx. 500 mm)
Plan the volt-
age supply
Operating voltage, power
requirements
According to Technical Data (see
“Technical Data”, page 61)
Plan adequate line cross-sections and
fuses
Task Requirements Work step
To Next Page
Loading...