SICK Flexi Compact User Manual

Security configuration
T
he security configuration includes the following parameters:
•
Passwords for user groups
These parameters can only be configured in the configuration software.
The application does not need to be stopped while the configuration is transferred to
the safety controller.
The security configuration is saved in the SmartPlug. A (defective) module can be
replaced with a compatible module without having to reconfigure the device.
Further topics
•
"Smar
tPlug", page 15
7.3 Overview main na
vigation menu
The O
verview main navigation menu contains information about the configuration.
7.4 Configuration main na
vigation menu
Configuration main na
vigation menu
Once a main module has been selected in the configuration software, the various
modules and connectable elements can be combined into a safety controller.
•
Hardware configuration: This is where you combine the modules and elements into a
safety controller.
•
Catalog : This is where you select the modules and elements and, if necessary,
configure your own elements.
•
In the Navigation pane, you can switch between the Hardware configuration, the BOM
info, and the Diagnostic bits (online only) of the modules.
•
Move elements here and leave for later use.: Here you can create a collection of devices
for a specific application and store them here temporarily.
•
Modules or elements can be deleted using the trashcan.
CONFIGURATION 7
8024589/2020-11-10 | SICK O P E R A T I N G I N S T R U C T I O N S | Flexi Compact
43
Subject to change without notice

SICK Flexi Compact Specifications

General

Brand	SICK
Model	Flexi Compact
Category	Controller
Language	English