SICK FLOWSIC100 Flare Addendum To Operating Instructions

2 FLOWSIC100 Flare · Addendum to Operating Instructions · 8025365/V1-0/2020-05 · © SICK Engineering GmbH
Document information
Described product
Product name: FLOWSIC100 Flare
Document identification
Title: Addendum to Operating Instructions
Part No.: 8025365
Version: 1-0
Release: 2020-05
Manufacturer
SICK Engineering GmbH
Bergener Ring 27 · D-01458 Ottendorf-Okrilla · Germany
Phone: +49 35205 52410
Fax: +49 35205 52450
E-Mail: info.pa@sick.de
Original document
The English version 8025365 of this document is an original
document from SICK Engineering GmbH.
SICK Engineering GmbH assumes no liability for the correctness of
an unauthorized translation.
Please contact SICK Engineering GmbH or your local representa-
tive in case of doubt.
Legal information
Subject to change without notice.
© SICK Engineering GmbH. All rights reserved.
Warning symbols
Warning levels/signal words
DANGER
Risk or hazardous situation which will result in severe personal
injury or death.
WARNING
Risk or hazardous situation which could result in severe personal
injury or death.
CAUTION
Hazard or unsafe practice which could result in less severe or
minor injuries.
NOTICE
Hazard which could result in property damage.
Information symbols
IMMEDIATE HAZARD
of severe injuries or death
Hazard (general)
Voltage hazard
Hazard in potentially explosive atmospheres
Hazard through explosive substances/substance mix-
tures
Hazard by noxious substances
Hazard by toxic substances
Important technical information for this product
Supplementary information
Link referring to information at another place

SICK FLOWSIC100 Flare Specifications

General

Brand	SICK
Model	FLOWSIC100 Flare
Category	Measuring Instruments
Language	English