36
8027872/1JTM/0-8/2023-05| SICKO P E R A T I N G I N S T R U C T I O N S | FLOWSIC550
Subject to change without notice
9 OPERATION
9 Operation
9.1 Operating using the display
▸ Press the push button to switch the display on.
Fig. 4: Push button
Display elements
Fig. 5: Operating and display elements
Display test
Perform a display test by pressing the push button for 10 seconds.
Note:
The display and the serviceinterface have a timeout and switch off after approx. 5 min-
utes (default setting) when no button has been pressed and no data transmission takes
place.
To Next Page
Loading...
