SICK FLOWSIC550 User Manual

37
8027872/1JTM/0-8/2023-05| SICK O P E R A T I N G I N S T R U C TI O N S | FLOWSIC550
Subject to change without notice
OPERATION 9
9.2 Display in the symbol bar
9.3 Battery fill level display
The battery symbol changes as the battery is discharged.
Note:
If a value is measured under error conditions, the value is shown blinking on the display.
Symbol Significance Description
External power supply
Displayed when the device is configured with exter-
nal power supply.
Meter Battery
Displayed when the device is configured for battery
operation
Device status: Malfunction
Blinking if the device has an error, the measured
value is invalid.
Device status: Warning
Blinking if device has a warning, the measured
value is still valid.
Registered events
Events have occurred since the last event sum-
mary reset.
Parameter locking switch
closed
Metrologically relevant parameters are protected
against changing; modifications are registered in
the Metrology logbook
Parameter locking switch open Metrologically relevant parameters can be
changed; the modifications are not saved in the
Metrology logbook.
Configuration mode
Configuration mode is active, parameters can be
changed.
Bluetooth
®
Bluetooth
®
is active.
Multiplier counter reading Multiplier for the displayed counter reading.
1

Symbol Description
Battery fill level ≥ 75%
Battery fill level ≥ 50%
Battery fill level ≥ 25%
Battery fill level ≥ 10%, the last segment of the battery symbol starts to blink when
the battery fill level drops below 10%.
1
1
1
1

SICK FLOWSIC550 Specifications

General

Brand	SICK
Model	FLOWSIC550
Category	Measuring Instruments
Language	English