8
8027872/1JTM/0-8/2023-05| SICKO P E R A T I N G I N S T R U C T I O N S | FLOWSIC550
Subject to change without notice
2 FOR YOUR SAFETY
2 For your safety
2.1 Basic safety information
▸ Read and observe these Operating Instructions.
▸ Observe all safety instructions.
▸ If anything is not clear: Please contact the manufacturer.
Retention of documents
▸ These Operating Instructions must be kept available for reference.
▸ These Operating Instructions must be passed on to new owners.
Correct use
▸ Only use the measuring device as described in these Operating Instructions.
The manufacturer bears no responsibility for any other use.
▸ Do not carry out any work or repairs on the measuring device not described in this man-
ual.
▸ Do not remove, add or change any components in or on the measuring device unless
such changes are officially allowed and specified by the manufacturer.
Otherwise
– The measuring device can become dangerous.
– The measuring device can lose function.
– The approval for use in lines pressurized above 50 kPa (0.5 bar) is no longer valid.
Special local conditions
▸ Follow all local laws, regulations and company-internal operating directives applicable at
the installation location.
2.2 Warning information on device
WARNING: Danger identification on device
The following symbol draws attention to important dangers directly on the device:
▸ Consult the Operating Instructions in all cases where the symbol is attached to the
device or shown on the display.
To Next Page
Loading...
Need help?
General
